Diagnostic Solutions

CarScope i-Tester Master Kit
CarScope i-Tester Master Kit
CarScope i-Tester Master Kit

CarScope i-Tester Master Kit

CarScope i-Tester is essentially a specialized type of engine analyser. It is a complex, multi-function tool, which can help diagnosing the engine and finding engine problems.

Category:

Description

Portable Engine Test Tool with additional accessories

CarScope i-Tester is essentially a specialized type of engine analyser. It is a complex, multi-function tool, which can help diagnosing the engine and finding engine problems. I-Tester could be used with both gasoline and diesel-powered vehicles. Currently, there are 2 modes available: Relative compression test and Common Rail pressure test, but several automated diagnostic tests are upcoming with a future firmware updates!

No oscilloscope knowledge skills needed. You can skip the training and set-up time of an ordinary oscilloscope and get directly to a quick, precise engine analysis;

This extended set adds the most necessary accessories in suitable plastic tool case with black EVA foam.

See the i-Tester product description for the main details.

Additional information

Advantages

Non-invasive test;
• Test completes within seconds;
• You do not need a pressure transducer to run the relative compression test;
• No mechanical work needed. No removal of spark plugs, glow plugs, or injectors, thus preventing accidental damage to the customer’s engine components. All you have to do is to disable the fuel system to prevent the engine from starting;
• Disabling fuel system is always better because you are not flooding your cylinders;
• No oscilloscope needed;
• Reduced skill level required and thus achieve rapid testing;
• No waveform analysis skills needed;
• Test based on scientifically grounded theory;
• Test proven in the practice for many years;
• Useful tool in the parking lot type situation instead of dragging a scope/laptop around;
• No current clamp needed, in case the DC voltage method is used
Features

2.4" TFT LCD 320х240
• no external power adapter needed
• 3 Channel — 3 measurement channels provide the ability to use a variety of voltage and current probes at the same time.
• Protection against reverse polarity connection
• The Relative Compression mode helps you quickly find a low compression cylinder
• Relative compression test function and automatic waveform analysis
• Ultra fast boot time
• Simple to use and connect, easy to use keyboard.
• Internal Micro SD card to save and review measurements
• Works on 4 stroke, diesel and gasoline engines;
• Works on 3, 4, 5, 6, 8, 10, 12-cylinder cars
• Works on DIS, conventional and Coil-on-Plug ignition systems;
• Only 12V electrical systems supported.
• Excellent industrial design
Applications

Reasons to perform a relative compression test using i-Tester:
Compression test has to be performed when the engine symptoms are as follows:
• engine misfiring;
• rough idle;
• loss of power over time;
• unexplained loss of power;
• smoke from the exhaust;
• puffing noise in induction or exhaust

Checking the engine health in cases as follows:
• In case of buying a used car;
• Before ECU remapping to evaluate engine status;
• Periodic prevention check;
• In cases where it is very hard to gain access to the spark plugs in order to perform a traditional compression test.

Related products